Clear, short definitions of the analytical, chemical, and documentation terms used on peptide COAs and product pages, from acetate salt and chromatogram to retention time, TFA, and UV detection.
How to use this glossary
Peptide COAs, product pages, and research papers share a vocabulary that can be hard to parse at first. This glossary defines the terms that come up most often when evaluating research-use-only peptides: analytical methods, chemistry, storage, and documentation.
Terms are grouped by letter range. Where a topic has its own guide, the definition links to it. For the testing terms in context, see third-party tested peptides and peptide testing labs explained.
Glossary terms A–C
- Acetate salt
- A peptide supplied with acetate as its counter-ion. Peptides are often converted from the TFA salt produced during purification to the acetate form, which some in vitro assay systems tolerate better.
- Aggregation
- The clumping of peptide molecules into larger assemblies. It is more likely in solution, at high concentration, and after freeze-thaw cycles, and it can reduce the amount of usable monomeric peptide.
- Aliquot
- A measured portion of a larger sample, divided out so each portion can be stored and thawed separately. Aliquoting limits freeze-thaw exposure for material held in solution.
- Amino acid analysis (AAA)
- A method that breaks a peptide down into its individual amino acids and quantifies each one. It confirms composition and is one way to determine net peptide content.
- Bacteriostatic water
- Sterile water containing a preservative, typically 0.9% benzyl alcohol, that inhibits bacterial growth after the vial is opened. NovaForge supplies it in 30ml vials.
- Blend
- A product containing more than one compound in the same vial, such as the KLOW blend or the NAD+/MOTS-c/5-Amino-1MQ blend. A useful COA addresses each component, not just the mixture as a whole.
- C-terminal amidation
- A modification in which the carboxyl group at the end of a peptide chain is replaced by an amide. Many native and synthetic peptides carry it, and it changes the theoretical mass of the molecule.
- Certificate of analysis (COA)
- A document issued by a testing laboratory reporting the methods used and the measured values for a specific sample. For research peptides, it typically covers identity, HPLC purity, and sometimes net content. See how to read a peptide COA.
- Chromatogram
- The graph produced by a chromatography run, plotting detector signal against time. Each peak represents a substance eluting from the column; the largest peak in a pure sample is the target peptide.
- Counter-ion
- An ion of opposite charge that pairs with charged groups on a peptide to form a salt. Common counter-ions are TFA and acetate. Counter-ions add weight, which is one reason net peptide content is lower than gross powder weight.
Glossary terms D–H
- Deamidation
- A chemical reaction in which asparagine (Asn) or glutamine (Gln) residues lose an amide group. It alters the peptide's structure and mass and is accelerated by moisture, heat, and higher pH.
- Deletion sequence
- An impurity missing one or more amino acids from the intended sequence, usually caused by an incomplete coupling step during synthesis. HPLC separates many of these from the main product.
- Desiccant
- A drying agent, such as silica gel, placed with stored material to absorb moisture. It helps keep lyophilized peptides dry in long-term storage.
- Disulfide bond
- A covalent link between the sulfur atoms of two cysteine residues. Disulfide bonds hold some peptides in a specific shape, and forming or breaking them changes the molecule's mass.
- Endotoxin
- Lipopolysaccharide from the outer membrane of Gram-negative bacteria. It is measured separately from purity, usually by the LAL assay, and is not part of a standard HPLC purity report unless stated.
- Freeze-thaw cycle
- One round of freezing and then thawing a sample. Repeated cycles can promote aggregation and degradation, especially in solution. See lyophilized peptide storage.
- HPLC
- High-performance liquid chromatography. A sample is pushed through a packed column under pressure, and its components separate by how strongly they interact with the column. It is the standard method for measuring peptide purity.
- Hygroscopic
- Tending to absorb moisture from the air. Lyophilized peptides are hygroscopic, which is why vials should reach room temperature before opening to prevent condensation.
Glossary terms I–L
- Identity
- Confirmation that a sample is the compound it is labeled as. It is established by LC-MS (matching observed mass to theoretical mass) or by matching HPLC retention time to a reference standard.
- Impurity
- Any substance in a sample other than the target compound. In synthetic peptides, common impurities include deletion sequences, truncated sequences, and oxidized or deamidated forms.
- In vitro
- Latin for "in glass." Describes experiments performed outside a living organism, such as in cell cultures, test tubes, or analytical instruments.
- LAL assay
- Limulus amebocyte lysate assay, the standard laboratory test for bacterial endotoxin. Values are reported in endotoxin units (EU).
- LC-MS
- Liquid chromatography coupled with mass spectrometry. The LC stage separates components, and the MS stage measures their mass, allowing direct comparison of observed mass with the sequence's theoretical mass.
- Lot
- A batch of material produced together under the same conditions and tracked under one identifier. A lot-specific COA describes that batch only. See peptide lot numbers explained.
- Lyophilization
- Freeze-drying. Material is frozen and then placed under vacuum so the ice turns directly to vapor. The dry product is far more stable than the same compound in solution.
Glossary terms M–P
- Main peak
- The largest peak in a chromatogram, corresponding to the target compound. HPLC purity is the main peak's share of the total peak area.
- Mass spectrometry (MS)
- An analytical technique that ionizes molecules and measures their mass-to-charge ratio. For peptides, it provides strong evidence of identity because the molecular mass depends on the exact sequence.
- Molecular weight
- The mass of one molecule, calculated from its atomic composition and usually expressed in daltons (Da) or g/mol.
- Net peptide content
- The percentage or amount of actual peptide in a sample, excluding counter-ions, residual water, and other non-peptide material. It is measured separately from purity. See HPLC purity vs. net peptide content.
- N-terminus
- The starting end of a peptide chain, carrying a free amino group unless it has been modified, for example by acetylation.
- Oxidation
- A reaction with oxygen that alters certain residues. Methionine, cysteine, and tryptophan are the most susceptible. Oxidized forms appear as separate peaks or mass shifts in testing.
- Peak area
- The area under a peak in a chromatogram, proportional to the amount of that component detected. Purity calculations compare the main peak area to the total.
- Peptide bond
- The amide bond linking one amino acid to the next in a chain. It absorbs UV light at low wavelengths, which is what makes UV detection of peptides possible.
- Purity
- In a peptide COA, usually HPLC purity: the share of UV signal under the main peak. It describes freedom from related impurities, not total peptide quantity. NovaForge does not release lots below 99% HPLC purity.
Glossary terms R–W
- Reconstitution
- Returning a lyophilized material to solution by adding a solvent. Once in solution, peptides are far less stable than as dry powder.
- Reference standard
- A well-characterized sample of known identity used for comparison. In retention-time identity testing, the sample must elute at the same time as the reference standard under the same conditions.
- Residue
- A single amino acid unit within a peptide chain. Sequences are described by their residues, for example a 15-residue peptide.
- Retention time
- The time a compound takes to travel through an HPLC column and reach the detector. Under fixed conditions, a given compound has a reproducible retention time.
- Reversed-phase chromatography
- The most common HPLC mode for peptides. It uses a nonpolar column and a gradient of water and organic solvent, separating peptides by hydrophobicity.
- RUO (research use only)
- A designation meaning a product is intended solely for laboratory research and not for human or animal use, diagnosis, or treatment. All NovaForge products are sold RUO.
- Sequence
- The specific order of amino acids in a peptide, written from N-terminus to C-terminus. The sequence determines theoretical mass and chemical behavior.
- Solid-phase peptide synthesis (SPPS)
- The standard method for making synthetic peptides. Amino acids are added one at a time to a chain anchored on a resin bead, then the finished peptide is cleaved off and purified.
- TFA (trifluoroacetic acid)
- A strong acid used in peptide cleavage and HPLC purification. It often remains as the counter-ion, producing a TFA salt. Some peptides are exchanged to acetate afterward.
- Theoretical mass
- The mass calculated from a peptide's sequence and modifications. LC-MS identity testing compares the observed mass against this value.
- UV detection
- The detector used in HPLC purity testing. Peptide bonds absorb ultraviolet light at low wavelengths, commonly around 210–220 nm, so the detector registers each peptide component as it elutes.
- Water content
- The amount of residual moisture in a lyophilized sample, often measured by Karl Fischer titration. It is one of the non-peptide components that lowers net peptide content.
What is the difference between purity and net peptide content?
HPLC purity is the share of UV signal under the main peak, describing how free the peptide is from related impurities. Net peptide content is how much of the powder is actually peptide, excluding counter-ions and water. A sample can be highly pure while net content is well below 100% of gross weight.
What does RUO mean?
RUO stands for research use only. It means a product is intended solely for laboratory research and is not for human or animal use, diagnosis, or treatment. All NovaForge Labs products are sold under this designation and are labeled accordingly.
Why do some peptides come as TFA salts and others as acetate salts?
TFA is used during cleavage and HPLC purification, so it often remains bound as the counter-ion. Some peptides are put through an extra exchange step to replace TFA with acetate. The counter-ion affects the weight of the powder and is one reason net peptide content differs from gross weight.
How is peptide identity confirmed?
Two common methods are LC-MS, which measures the molecular mass and compares it with the theoretical mass of the sequence, and HPLC retention-time matching, which checks that the sample elutes at the same time as a known reference standard under identical conditions. Each NovaForge COA states which method was used.